Fixed Steel Ladders
Fixed steel fire escape ladders can provide a means of escape if there is not physically enough room to install a staircase. However, most regulations (BS5395, Approved Document K etc) do not recommend their use, principally because the very old, and the very young, would find it hard to climb down them. Having said that, the exit route provided by a fixed fire escape ladder is definitely better than not having one at all. Vertical fire escape ladders are principally an access tool for plant rooms and suchlike; companionway ladders are more user-friendly for general staff.
- Ideal for when a fixed, vertical ladder is required and there is limited room on the ground
- Can be supplied with safety cage when more than 2.5m in length
- Provide a permanent means of escape, unlike other types of ladder which are stored inside and have to be erected for use in evacuations
- Designed for one person to use at a time
- Long enough ones include a rest platform every 6m
- Available in steel, aluminum alloy and stainless steel
Companion Way Ladders
- 65-75 degree slope is easier to climb down than a standard vertical ladder
- Maximum height of 3m
- Minimum gap of 250mm between top of steps and the wall
- A single-line handrail is attached to each side of the ladder
- Top of the ladder can be protected by a self-closing gate
- Rungs can be open steel flooring (Lionweld or similar), 20mm round steel bar, or durbar (mild steel ‘checquerplate’ with a raised diamond gripping surface)
Fire Escape Ltd makes and installs both types of fire escape ladder, and will be happy to discuss a customer's requirements with them when contacted.